2004 Impreza WRX
Paul B :: Member #72956
Car Description:
I'm the original owner of this one and throughout the years have been steadily building it up to this final metamorphosis that I've had planned for quite some time there's still a roll, cage and much more expensive suspension to be added, as well as potentially a six speed, but I'm patient and will wait for that to happen.
Used to live in Southern California and took it to track of its at streets of Willow and Willow Springs as well as Fontana and never got a chance to take it to Buttonwillow, but besides that it spent a lot of time going up and down canyons.
At this point it mostly sits in the garage and comes out on the weekend, but the plan is to eventually get it on the track here in the DFW area and get it dialed in and maybe do some amateur events.
--Block--
New OEM EJ25 short block.
Cosworth Pistons 99.5MM
Killerbee oil pan, pick up & baffle
10MM Oil pump
ATI Super Damper crank pulley
--Heads--
New OEM EJ20 heads
Larry Auto Machine chambering service
Volume of compression dome was machined out, not the overall circumference to match the EJ25 bore. This was to promote quench.
54 CC volume
No porting was done
Get A Dom Tune Cylinder 4 cooling mod
--Valvetrain--
Kelford 199-C Cams
Kelford Valve springs
Supertech valves
--Ignition--
NGK step colder plugs .28 gap
OEM head gaskets
ARP head studs
Gates racing timing belt
RCM "High Grip" timing belt tensioner
--Engine sensors / electronics--
Cobb 4 bar MAP sensor
GM Fast response air temp sensor - Mounted underneath throttle body port of TMIC
--Induction--
JDM Spec C Intake manifold
Roger Clark 80mm mafless short ram intake (reported to be capable of 647cfm)
Roger Clark turbo inlet
--Turbo--
Blouch TD05H 18G-XT 8cm
Cobb boost control solenoid
--Induction Cooling--
Spec C JDM TMIC
--Fueling--
ID 850 cc Injectors
Walbro 255 (Not “hardwired”)
Fore Innovations F2i FPR
IAG fuel rails
-6 engine bay fuel lines and fittings
--Cooling--
Koyo radiator
Silicone hoses
--Exhaust--
Stock header
Cobb up-pipe
Cobb Catted downpipe
HKS hi-power cat back exhaust
--Front End--
Whiteline - bump steer kit
Superpro - Anti Lift Kit
Whiteline - Front inner control arm bushings
Whiteline - Front end links
Stock front anti-roll bar
Whiteline - Steering rack bushings
Oswaldperformance Subframe Brace
LRB speed Undertray
Subtle solutions - Fender braces
STI/Group-n - pitch rod
STI/Group-n - motor mounts
STI/Group-n - tranny mount
Delta Motorworks - Shifter Pivot Bushings
Delta Motorworks - Shifter U-Joint Linkage
kartboy- rear shifter stay bushing
Whiteline - Front Gearbox - positive shift kit bushing
--Rear End--
Whiteline - Rear Diff - front support lock bushings
Whiteline - Rear Subframe - lock bolt kit
TSS Fab - Rear Trailing arms
Whiteline - Lateral Links
Whiteline - Rear Endlinks
Whiteline - 24mm Adjustable Rear Anti-roll bar
Whiteline - Rear Sway bar - mount kit
STI/Group-n - Rear Diff mount
Whiteline - Rear Control arm - inner lock washers
--Drivetrain--
5 Speed with JDM close ratio gears - Surfaced and treated
ACT - Extreme duty clutch
Goodrich SS clutch line
Driveshaft shop, carbon fiber driveshaft
Cusco RS 1 way front DIFF
Cusco RS 1.5 way rear DIFF
TSS Fab Transmission subframe
--Suspension--
Koni Super Sport Inserts
Race camp engineering wagon springs
--Brakes--
--Front--
Stoptech - 328mm Big brake kit
--Rear--
06-07 WRX rear hubs, spindles and Sumitomo brake swap
Stoptech pads
Goodridge - SS lines
Motul 660 - Blue brake fluid
Cusco - Master cylinder brace
--Wheels--
WEDs TC105X 18x9 +45 with 3mm spacers
--Tires--
Advan Apex 255/40 18
--Interior--
Defi - Boost pressure / Imperial read out
Defi - Oil pressure / Imperial read out
Defi Oil Temp / Imperial read out
Custom A Piller mounting
Schroth Suabru harness
Kirkey Club racing seat
Custom Short shifter - Modeled after CAE shifter.
Custom LED gauge cluster lighting
--Exterior--
Full Sedan fender conversion
STi front bumper
OEM Impreza rear splash guards
06-06 STi Rear Diffuser
LED light swap front and rear
Cleared headlights with LED projector retrofit
Porsche Chalk paint color.
Oswald performance lightweight front bumper beam
Oswald performance slight weight rear bumper beam
Oswald performance tow hooks
And more that I cant think of.....
